__82720.1685452825.jpg?c=2)
__82720.1685452825.jpg?c=2 "AudioControl LC2i 2-Channel Line Out Coverter, Accubass & Sub Control To Amps")
__77721.1685452825.jpg?c=2 "AudioControl LC2i 2-Channel Line Out Coverter, Accubass & Sub Control To Amps")
__25709.1685452826.jpg?c=2 "AudioControl LC2i 2-Channel Line Out Coverter, Accubass & Sub Control To Amps")
__37687.1685452826.jpg?c=2 "AudioControl LC2i 2-Channel Line Out Coverter, Accubass & Sub Control To Amps")
Description
AudioControl LC2i
2-Channel Line Output for Adding Amps to your Factory System
2 channel line out converter with accubass® and subwoofer control
The LC2i, is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality pre-amp signals that can then be directed to after-market processors and/or amplifiers. Users can enjoy maximum sound quality while maintaining the use of factory volume and steering wheel controls.
Features
- Two channels of Active speaker level inputs – Accept 400 watt signals per channel
- Fixed and variable outputs with discrete level controls
- AccuBASS® processing for correction of bass roll-off
- GTOTM Signal Sensing
- Input For Optional Remote Level Control
- Compact design
FAQ
- Does the LC2i require power? Yes, the LC2i is an active line output converter and should be connected to the battery for constant 12 V and to your common ground for after market amps and processors.
- Do I need to find a remote turn on lead? No, the LC2i has GTO Signal Sensing, which will turn the unit on when it detects signal at the input from your factory amp/powered head unit.
Specifications
Inputs
- Speaker Level Input: 1 (2 channels)
- Maximum Speaker Level Input: 400W per channel at 4Ω
- Input Impedance: 20kΩ
Outputs
- Preamp Outputs: 2 (2 channels main, 2 channels bass)
- Maximum Output Level: 9.5Vrms/13V peak
- Output Impedance: 150Ω
Performance
- Total Harmonic Distortion: 0.01%
- Signal to Noise: >110dB
- Frequency Response: 10Hz-100kHz ±1 dB
Control
- Remote In
- 12VDC Remote Out (always active when unit is on)
General
- Current Draw: 150mA
- Recommended Fuse Rating: 1A
Weights & Dimensions
- Dimensions: 5.4″L x 3.25″D x 1.5″H (6.5″L including mounting brackets)
- Weight: 1.0lbs (0.5kg)
MPN: LC2I | Category: Amplifiers
