In-Dash Receiver Installation
Standard Installation Includes: remove & re-install dash panel, connect wiring harness, antenna adapter, install mounting kit and install microphone near visor, if needed (parts not included). Premium sound integration devices will require additional labor.
Standard Installation Includes: mounting the amplifier in an agreed upon location in the rear, trunk or under a seat, making all connection to the radio and speakers, fused connection at the battery and proper ground connection. Amplifier wiring is not included and must be purchased separately.
Standard installation includes: Removal and re-install of panels to access factory speaker locations, install speakers behind existing grilles to maintain factory appearance including any minor modifications needed to install speakers, wiring and mounting crossovers (if applicable) behind factory panel.
Remote Start & Security Installation
Standard Installation Includes: remove & re-install dash panel, connect wiring harness, Installing valet switch, Installing hood pin safety switch, programming unit for correct operation and features. Some features may require additional parts and labor. Some vehicles require additional labor.
*Remote Start products marked with "Installed" and/or "Bypass Included" have included standard installation and/or bypass module in the total price of the unit. Some restrictions may apply.
Standard installation includes mounting overhead to a flat headliner without console, connect wiring harness to power source. Vehicles that do not have a flat headliner or have a console will require additional labor charges. FM wired modulator $125 parts and labor sold separately
Safety & Convenience Installation
Standard Installation Includes: remove & re-install panels, running of video and 12volt harness to camera location, mount and adjust equipment for best performance. Vehicles with lift gates or have minimal access to camera location require additional labor charges.
Standard Installation Includes: remove & re-install panels, mounting of switch in flat dash panel, running of 12volt harness to lighting location, mount and adjust equipment for best performance. Vehicles that require modification to access mounting location or switch location will require additional labor charges.
Truck Accessory Installation
Standard installation includes remove & re-install of required panels or factory equipment. Installation of new equipment per manufacturer specifications. Installation of electrical harness when required.
Prices are estimates only, some cars require additional parts and labor. Final labor price when vehicle is inspected at the store prior to installation, based on the complexity and time involved for each installation.
Shop Parts Charge
There is a 15% Shop parts charge added to all labor to cover basic shop materials such as wire ties, solder, tape, sealant, flex loom, etc. Additional charges, beyond the Parts Charge, may be required to cover specific parts needed for your installation. Parts such as speaker wire, power wire, and battery terminals are NOT covered by the Parts Charge.