Close

Important Links

Shop By Category

Site Information

  • Rockford Fosgate R1200-1D Prime 1,200 Watt Class-D Mono Amplifier
  • Rockford Fosgate R1200-1D Prime 1,200 Watt Class-D Mono Amplifier
  • Rockford Fosgate R1200-1D Prime 1,200 Watt Class-D Mono Amplifier
  • Rockford Fosgate R1200-1D Prime 1,200 Watt Class-D Mono Amplifier
  • Rockford Fosgate R1200-1D Prime 1,200 Watt Class-D Mono Amplifier

Rockford Fosgate R1200-1D Prime 1,200 Watt Class-D Mono Amplifier

$299.99 $399.99 (You save $100.00)
SKU:
R1200-1D
Shipping:
Calculated at checkout
Quantity:

Reviews:

Product Description

R1200-1D
Rockford Fosgate R1200-1D Prime 1,200W Class-D Mono Amp

The PRIME R1200-1D 1200 watt amp is an ultra-efficient mono amplifier for cars and trucks stable down to a 1-Ohm load without taxing the electrical system. The frequency response of the R1200-1D is optimized exclusively for use with subwoofers.

The Prime R1200-1D subwoofer amplifier offers high efficiency through the implementation of its Class D circuitry while delivering rich, full bass to any system. This car amplifier is optimized for subwoofers with the implementation of an infrasonic filter to keep those ultra-low (inaudible) bass notes from damaging your subwoofer system. Match with a 4-channel stereo amplifier for your mids/highs and you’ll have a Rockford Fosgate system that any Car Audio Fanatic will envy.

Product Features

  • 12dB/octave Butterworth crossover
  • Infrasonic filter
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Remote PLC (Punch Level Control)
  • RCA pass-thru outputs
  • Real time output and power supply thermal sensing
  • Cast aluminum heatsink
  • Top mounted controls
  • 4 Gauge power/ground connectors
  • MOSFET power supply
  • Short circuit protection
  • Muted turn on
  • 1 Year Standard Warranty 

Technologies

CEA-2006 Compliant CE Compliant Class D

CEA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.

CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).

Class D

High efficiency amplifier design that reduces current consumption from the charging system.

SPECS

CEA-2006 Compliant: CEA-2006 Power Rating
400W x 1 @ 4?
≤1.0% THD+N
Number of Channels: 1
Rated Power 
(RMS Continuous Power):
400 Watts x 1 @ 4-Ohm 
800 Watts x 1 @ 2-Ohm 
1200 Watts x 1 @ 1-Ohm
Total Power 
(Sum of Rated Power):
1200 Watts RMS
Dynamic Power 
(PVC/PowerCube®):
499 Watts x 1 @ 4-Ohms 0° Res 
898 Watts x 1 @ 2-Ohms 0° Res 
1,400 Watts x 1 @ 1-Ohm 0° Res
Bridgeable: No
Frequency Response: 20Hz to 250Hz +/-1dB
Efficiency (average): 85% @ 4-Ohm 
85% @ 2-Ohm 
80% @ 1-Ohm
Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0% 
2-Ohm: <1.0% 
1-Ohm: <1.0%
Signal-to-Noise (CEA): 83 dB
Channel Separation:
Common Mode Rejection: 72 dB
Damping Factor: >200
Crossover Controls: Low-Pass: Variable 50Hz - 500Hz @ 12dB/Octave 
Infrasonic:
Tone Controls: 0dB to +18dB @ 45Hz
Input Sensitivity: 150 mV to 4 V
Signal Input: Low Level: 1 RCA Pair
Signal Output: Low Level: 1 RCA Pair
Power Input Connector: Block
Power Wire Gauge: 4 AWG
Speaker Output Connector: Block
Speaker Wire Gauge: 12 AWG
Heat Sink Type: Cast aluminum
Cooling: Convection
Remote Controls: Variable 0dB to +12dB @ 45Hz
Visual Indicators: Power 
Protect
Circuit Topology Class: Class D
Operating Voltage: 9 - 16 VDC
Recommended Fuse 
(not included):
150 A
Max. Current Draw (13.8V Sinewave): 110 A
Average Current Draw (13.8V Music): 55 A
Suggested Alternator: 100 A
Shipping Weight: 7.825 Lbs. (7.82 Kg.)
Dimensions (H x W x D): 1.97" x 6.77" x 11.06" 
(5cm x 17.20cm x 28.10cm)
Dimensional Diagram:

 

 

 

 

Find Similar Products by Category

Vendors Other Products

Write Review

This product hasn't received any reviews yet. Be the first to review this product!